RevSpin Microcentrifuge 200


The RevSpin RS-200 has Multiple speed selections up to 11,000 RPM (in increments of 1,000 RPM). An oversized rubber base increases the reliability of the RevSpin models by absorbing vibration and limiting bench walking. Now includes free 0.2ml PCR strip rotor, 16 position 1.5/2.0ml rotor and 12 0.5ml reducers.

Assembled in USA


3 in stock (can be backordered)

SKU: RS-200 Category: Tag:



Power requirements: 110-240 VAC 50-60 HZ 1.5 amps, grounded cord
Motor: Ball bearing, high efficiency, permanent magnet DC
Timer: 60 minute digital timer
Speed: Max-11,000 (RPM)
Speed: Min-1,000 (RPM)
G-Force: Min- 50 (RCF)
G-Force: Max- 7711 (RCF)
Rotors: 16 position 1.5 or 2.0 ml (holes numbered 1-16), 0.2ml pcr strip rotor and 12 0.5ml reducers all included.
Rotor type: 45°fixed angle, unique vertical loading
9 inches tall x 7 inches diameter
Net weight: 5 lb. (shipping weight 7 lb.)


The digitally controlled multi-speed microcentrifuge, includes a pulse feature for short spins and 12 0.5ml reducers
Imbalance detection
High capacity 16 position rotor receives 1.5 or 2.0 ml tubes, each hole is clearly marked by numbers
Easy-load rotor permits tubes to be loaded vertically, but spin in 45° position
Oversized  soft rubber base efficiently absorbs vibration, reduces noise and  vibration transmitted to bench, stops bench walking, resists tipping,  and absorbs impact from careless handling
Oversized 8mm shaft will not bend from abuse or imbalance
Forced air ventilation assures specimens, rotor and motor stay cool, even during extended runs
Safety switch instantly stops rotor if lid is slightly ajar, will not operate without cover in place

Additional information

Weight 7 lbs
Dimensions 13 × 9 × 9 in


There are no reviews yet.

Be the first to review “RevSpin Microcentrifuge 200”

Your email address will not be published. Required fields are marked *